KTX 010124 Gold Premium Woodscrews M4 Bulk Value Tubs 50mm

KTX 010124 Gold Premium Woodscrews M4 Bulk Value Tubs 50mm

M4.0 x 50 x 900

KTX Gold is an internal woodscrew available in a range of sizes that fits in less than half the time of a normal woodscrew and provides a super smooth finish in timber.

KTX bits accompany all boxes and tubs for free.  They are 50mm in length which makes them ideal for use in impact drivers as well as drill/drivers.

Features & Benefits:

• KTX head recess
• Suitable for pozi, square, philips square, and KTX screw bits
  Stick fit head for KTX, square and some pozi drive bits. No wobbling or
  head slippage and minimum damage to head recess from use.
• Yellow passivated (Gold) / BZP (Silver) - Internal, C1022 heat treated
  hardened steel
• Deep drive head recess
• Double countersunk
• Fast pull out capability due to stick fit head
• 4 Angled ribs for smooth finish
• All screws accompanied by 50mm hardened steel KTX bit ideally suited
  for impact drivers, hammer/drill drivers and drill drivers. All M3.0 use
  KTX No.1 bit, all M3.5 - M5.0 use KTX No.2 bit and all M6.0 use KTX
  No.3 bit
• Very sharp start point for fast penetration
• Significantly reduced splitting in timber allowing close to edge fixing
  Lubricated coating for ease of entry into timber
  Suited to hardwood, softwood, MDF, plywood, Chipboard, composite
  Precision TYA-17 curved cut
• Helical thread cut
• KTX Gold Salt spray tested beyond 400 hours
  Coarse thread
• Precision manufactured
• Flat head
• High shear strength for KTX Gold/Silver and Bronze “ M3.0 = 3.4KN,
  M3.5 = 4.1 KN, M4.0 = 5.1KN, M4.5 = 6.2KN , M5.0 = 7.3KN , M6.0 =
  10.5KN
• All KTX screws are CE rated EN:14592