KTX Gold Premium Woodscrews - M5.0 x 50

KTX Gold is an internal woodscrew available in a range of sizes that fits in less than half the time of a normal woodscrew and provides a super smooth finish in timber.

The KTX Super TIGHT HOLD® head recess is unique and provides the best head recess for driving in and taking out screws.

All screws are manufactured to a high standard by one of the world’s top producers of quality screws using heat treated hardened steel and subject to strong quality controls.

KTX bits accompany all boxes and tubs for free.  They are 50mm in length which makes them ideal for use in impact drivers as well as drill/drivers.

• KTX head recess
• Suitable for pozi, square, philips square, and KTX screw bits
• Super TIGHT HOLD head recess for KTX, square and some pozi drive bits. No wobbling
• Deep drive head recess
• Double countersunk
• Fast pull out capability due to super TIGHT HOLD head recess fit.
• 4 Angled ribs for smooth finish
• All screws accompanied by 50mm hardened steel KTX bit ideally suited for impact drivers, hammer/drill drivers and drill drivers. All M3.0 use KTX No.1 bit, all M3.5 - M5.0 use KTX No.2 bit and all M6.0 use KTX No.3 bit
• Very sharp start point for fast penetration
• Significantly reduced splitting in timber allowing close to edge fixing
• Lubricated coating for ease of entry into timber
• Suited to hardwood, softwood, MDF, plywood, Chipboard, composite
• Precision TYA-17 curved cut
• Helical thread cut
• KTX Gold Salt spray tested beyond 400 hours
• Coarse thread
• Precision manufactured
• Flat head
• High shear strength for KTX Gold/Silver and Bronze – M3.0 = 3.4KN, M3.5 = 4.1 KN, M4.0 = 5.1KN, M4.5 = 6.2KN , M5.0 = 7.3KN , M6.0 = 10.5KN
• All KTX screws are CE rated EN:14592

BOX Quanities - ALL Boxes contain approx 200 screws EXCEPT the sizes listed below:

M5.0 x 90mm - QTY 150
M5.0 x 100mm - QTY 150
M5.0 x 120mm - QTY 150
M5.0 x 130mm - QTY 150
M6.0 x 70mm - QTY 150
M6.0 x 80mm - QTY 150
M6.0 x 100mm - QTY 150
M6.0 x 120mm - QTY 100
M6.0 x 130mm - QTY 100
M6.0 x 150mm - QTY 50
M6.0 x 180mm - QTY 50
M6.0 x 200mm - QTY 50