Trend Pro Guided Trimmer 6.3mm Diameter 25.4mm Length

Trend Pro Guided Trimmer 6.3mm Diameter 25.4mm Length

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications.

Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring.

Uses
Trimming plastic or plywood overlay.
Copy profiling - use the bearing to follow a template or base edge of board.

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Tooling Tungsten Carbide
1/2in Shank.

Tooling Tungsten Carbide
1/4in Shank.

Angle A = 90°
D = 6.3 mm
C = 25.4 mm

Specification

D=1/4 inch

D=6.3 mm

C=25.4 mm

B=Fractionally larger than cutter dia mm

A=90 degrees

Shank Diameter=1/4 inch

Overall length=65 mm